| Customization: | Available |
|---|---|
| Range: | 0-400mm |
| Certification: | CE, RoHS |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
400mm digital angle level
 |
A spirit level or bubble level is an instrument designed to indicate whether a surface is horizontal (level) or vertical (plumb). Different types of spirit levels may be used by carpenters, stonemasons, bricklayers, other building trades workers, surveyors, millwrights and other metalworkers, and in some photographic or videographic work. |
|
Item |
Length |
Range |
Resolution |
Angle precision |
|
LL99G |
400mm |
0-225° |
0.1° |
±0.5° |
² Double-side precision, milling base and high precision measuring.
² Three-level structure devices, 180° adjustment,45° rotation design .
² Soft handling, comfortable feel, solid structure.
² With precise measurement and guaranteed quality.
² Our spirit level is the glass or plastic vial. This vial contains a coloured liquid that has a bubble of air that moves horizontally or vertically along the vial.
² Spirit Level can be with horizontal and vertical vial.
² With Heat-Shrink packing.
² Can be made with your logo.
Using
² To properly use a spirit level, it should be positioned in the centre, on a firm horizontal or vertical surface. If the plane to be checked is not even, place a straightedge on top and the spirit level on top of the straightedge.
² The bubble should sit between the graduation marks.
² Where the bubble sits over or out of the graduation marks, adjust the spirit level to the left or right.
² When the left side is too high the bubble will sit on the right side of the graduation marks and vice-versa for the opposite side.
² Using this as a guide, you can now make the necessary adjustment to create a perfectly level project.
² When you need to check vertical levels, place the back edge of the spirit level against a straightedge, which is then positioned against the vertical plane to be checked.
² If the bubble is between the graduations, the plane is level. Where the bubble lies outside the graduations, move the straightedge until the bubble is centrally placed.
² This will allow you to determine any unevenness on the vertical plane.
){kind=link}